Replacing the battery in your Subaru key is a simple task that can be completed in a few minutes. A weak or dead battery can prevent your key from working properly, so it’s important to replace it as soon as possible.
You will need a new battery (CR2025) and a small Phillips head screwdriver.
Instructions:
- Locate the small screw on the back of the key and remove it.
- Gently pry open the key case.
- Locate the battery and remove it.
- Insert the new battery with the positive side facing up.
- Snap the key case back together.
- Replace the screw.
1. Tools
The tools you need to change the battery in a Subaru key fob are a new battery (CR2025) and a small Phillips head screwdriver. The battery is responsible for powering the key fob’s electronic components, such as the buttons and the transmitter that sends a signal to the car. The screwdriver is used to remove the screw that holds the key fob together.
Without the correct tools, it would be difficult or impossible to change the battery in a Subaru key fob. The battery is held in place by a small screw, and the key fob is made of plastic, which can be easily damaged if you try to pry it open with a sharp object. The Phillips head screwdriver provides the necessary precision to remove the screw without damaging the key fob.
Changing the battery in a Subaru key fob is a simple task that can be completed in a few minutes. However, it is important to have the correct tools to do the job properly.
2. Steps
The steps outlined above are essential for successfully changing the battery in a Subaru key fob. Each step plays a crucial role in ensuring the proper functioning of the key fob.
- Locate the small screw on the back of the key and remove it: This screw holds the key fob together. Removing it allows you to access the battery.
- Gently pry open the key case: Once the screw is removed, you can carefully pry open the key case using a small flathead screwdriver or a fingernail. Be careful not to damage the key fob.
- Locate the battery and remove it: The battery is usually located in a small compartment inside the key fob. Use your fingernail or a small tool to remove the battery.
- Insert the new battery with the positive side facing up: Make sure that the positive side of the new battery is facing up when you insert it into the key fob.
- Snap the key case back together: Once the new battery is inserted, snap the key case back together.
- Replace the screw: Finally, replace the screw that holds the key fob together.
Following these steps in order is important for changing the battery in a Subaru key fob. Skipping or performing the steps incorrectly could result in damage to the key fob or prevent it from functioning properly.
By understanding the connection between these steps and the overall process of changing the battery in a Subaru key fob, you can ensure that your key fob remains in good working condition.
3. Time
Changing the battery in a Subaru key fob is a relatively simple task that can be completed in a short amount of time. This is important because a dead battery can prevent you from using your key fob to lock or unlock your car, or to start it. Knowing how to change the battery quickly and easily can save you time and hassle.
The instructions for changing the battery in a Subaru key fob are typically straightforward and easy to follow. The process usually involves removing a screw on the back of the key fob, prying open the case, removing the old battery, inserting the new battery, and snapping the case back together. Most people can complete these steps in under 5 minutes.
Being able to change the battery in your Subaru key fob quickly and easily is a valuable skill. It can save you time and hassle, and it can also help you to avoid getting locked out of your car.
Here are some tips for changing the battery in your Subaru key fob quickly and easily:
- Have the correct tools on hand. You will need a small Phillips head screwdriver and a new CR2025 battery.
- Follow the instructions carefully. The instructions for changing the battery in a Subaru key fob are typically straightforward and easy to follow. Be sure to read and understand the instructions before you begin.
- Be careful not to damage the key fob. The key fob is a delicate piece of equipment, so be careful not to damage it when you are changing the battery.
By following these tips, you can change the battery in your Subaru key fob quickly and easily.
FAQs about “How To Change Subaru Key Battery”
This section provides answers to frequently asked questions about changing the battery in a Subaru key fob. These questions are designed to address common concerns or misconceptions, providing comprehensive information to help you successfully change the battery in your Subaru key fob.
Question 1: How often should I change the battery in my Subaru key fob?
Answer: The battery in your Subaru key fob should be changed every 2-3 years, or as needed if the key fob starts to malfunction.
Question 2: What type of battery does my Subaru key fob use?
Answer: Most Subaru key fobs use a CR2025 battery.
Question 3: Can I change the battery in my Subaru key fob myself?
Answer: Yes, changing the battery in a Subaru key fob is a simple task that can be completed in a few minutes with the right tools.
Question 4: What tools do I need to change the battery in my Subaru key fob?
Answer: You will need a small Phillips head screwdriver and a new CR2025 battery.
Question 5: How do I know if the battery in my Subaru key fob is dead?
Answer: If the buttons on your key fob are not working or if the key fob is not able to lock or unlock your car, it is likely that the battery is dead.
Question 6: Can I use any type of battery in my Subaru key fob?
Answer: No, it is important to use the correct type of battery in your Subaru key fob. Using the wrong type of battery can damage the key fob.
Tips on How to Change Subaru Key Battery
Replacing the battery in your Subaru key fob is a simple task that can be completed in a few minutes. However, there are a few things you should keep in mind to ensure that you do the job correctly and avoid any damage to your key fob.
Tip 1: Use the correct type of battery. Subaru key fobs use a CR2025 battery. Using the wrong type of battery can damage the key fob.
Tip 2: Be careful not to damage the key fob. The key fob is a delicate piece of equipment, so be careful not to drop it or pry it open with too much force.
Tip 3: Follow the instructions carefully. The instructions for changing the battery in a Subaru key fob are typically straightforward and easy to follow. Be sure to read and understand the instructions before you begin.
Tip 4: If you are having trouble changing the battery, consult a professional. A qualified technician can change the battery for you quickly and easily.
Tip 5: Change the battery regularly. The battery in your Subaru key fob should be changed every 2-3 years, or as needed if the key fob starts to malfunction.
Summary: Changing the battery in your Subaru key fob is a simple task that can be completed in a few minutes. By following these tips, you can ensure that you do the job correctly and avoid any damage to your key fob.
Conclusion: By following these tips, you can keep your Subaru key fob in good working condition for years to come.
Conclusion
Changing the battery in your Subaru key fob is a simple task that can be completed in a few minutes. By following the steps outlined in this article, you can ensure that your key fob is always working properly.
Remember to use the correct type of battery and to be careful not to damage the key fob. If you are having trouble changing the battery, consult a professional. Changing the battery regularly will help to keep your key fob in good working condition for years to come.
